Serving the Little Rock area  ·  (501) 476-2705  ·  Open Mon-Sun 7am-7pm
📞 (501) 476-2705 Free Quote

Metal Roofing in Jacksonville, AR (72099) · Local Professionals

Little Rock Metal Roofing · Fast response in Jacksonville and the Little Rock area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+167Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Jacksonville sits just northeast of Little Rock, a city built around the air base and the working neighborhoods that grew up with it. The housing stock here tells the story: 1950s-70s brick ranches and split-levels with low-pitched shingle roofs, plus a growing number of newer subdivision homes and small ranches on the outskirts. Lots are often flat and generous, with mature pines and oaks that drop limbs and needles all year.

Homeowners in Jacksonville (72099) call Little Rock Metal Roofing because we know how this area weathers. From the older ranches near the base to the newer builds off Highway 67, we see the same problems: wind-lifted shingles after spring storms, active leaks at fasteners, and hail damage that shows up months later. We are fully insured and based just down the road in Little Rock, so we can be on site fast when it matters.

Metal Roofing in Jacksonville (72099)

Jacksonville is mostly flat to gently rolling, with a mix of brick ranches, split-levels, and newer subdivision homes. The soil is rocky clay and sandy loam, which drains slowly after heavy rain, so we pay close attention to gutter pitch and downspout placement. Many properties have long driveways and mature trees, which can mean tight access for delivery trucks and staging. We plan for that. On older homes, we often find multiple layers of shingles, which affects whether a retrofit over shingles is allowed by code. We check that before we quote. The heat and humidity here also feed algae and mildew on north-facing roof slopes, and metal roofs with the right finish coat resist that much better than asphalt.

Our team has worked across Pulaski County for years, from the Quapaw Quarter to Sherwood and North Little Rock. In Jacksonville, we have replaced shingle roofs on 1960s ranches near the base, repaired wind damage on newer homes off Main Street, and installed standing seam on properties where homeowners wanted to stop worrying about hail. We know the local inspectors and the permit office, and we know what holds up in this climate.

Our services in Jacksonville

How a Job Works in Jacksonville

Step 1: You call us at (501) 476-2705 or request a free estimate online. We schedule a visit, often within a day or two, and walk the roof with you. We check for active leaks, storm damage, and the condition of your current roof. You get a written estimate with options, including metal roof replacement, repair, or a retrofit over shingles if your home qualifies.

Step 2: Once you approve, we pull the permit with the City of Jacksonville (requirements vary, so we confirm with the building department). We order materials and schedule the crew. On install day, we protect your landscaping, set up a staging area, and keep the site secure. Most residential roofs take one to three days, depending on size and weather. If your home is in an HOA, we help you submit the panel profile and color for approval before we order.

Step 3: We clean up completely, magnet-sweep the yard for nails, and walk the finished roof with you. We do not leave until you are satisfied and we have shown you how the new roof and gutters work together.

Pricing in Jacksonville depends on the size and pitch of your roof, how many layers of old shingles need to come off, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free, and we document everything for your insurance claim if you file one. We never promise coverage or suggest a deductible can be waived. Call (501) 476-2705 for a free estimate tailored to your property.

My 1960s ranch near the base has two layers of shingles. Can you install metal over them?
Maybe. Local code limits how many layers you can recover over, and some homes in Jacksonville already have two layers. We check the deck condition and the existing layers during the free inspection. If a retrofit is allowed, it can save you money on tear-off and disposal. If not, we will explain why and quote a full replacement.
A storm just lifted some panels on my roof off Highway 67. How fast can you get out?
We prioritize storm and wind damage calls. Call us at (501) 476-2705 and we will schedule an inspection, often same day or next day. We can tarp active leaks and make temporary repairs to prevent further damage, then give you a written estimate for permanent repairs or replacement.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Jacksonville?
For a basic corrugated or ribbed panel roof, you might start around $5.50 per square foot, while standing seam runs closer to $10 per square foot. A 1,500 square foot roof could range from roughly $8,000 to $15,000 depending on pitch, tear-off, and trim. We give you a firm number after inspecting your roof.
Do I need a permit from the City of Jacksonville for a metal roof?
Most full replacements and re-roofs require a permit, but thresholds and fees vary. We confirm the current requirements with the City of Jacksonville building department before starting work. We handle the paperwork and schedule the inspection so you do not have to.
My HOA requires approval for roof color. Can you help with that?
Yes. We provide color samples and manufacturer spec sheets for your HOA submission. We can also adjust the panel profile to meet neighborhood guidelines. We recommend getting approval before we order materials so there are no delays.
Are you insured for work on my Jacksonville property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property if anything goes wrong on the job.
What maintenance does a metal roof need in Jacksonville's climate?
Check fasteners annually, especially after spring storms. Keep gutters clear of pine needles and leaves. Wash north-facing slopes occasionally to prevent algae. We offer inspection and maintenance plans, and we can replace screws or re-fasten panels if needed. A well-maintained metal roof handles heat, hail, and humidity well here.
Why choose us?

Trusted professionals in Little Rock

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Little Rock

All your work handled by qualified professionals in Little Rock

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

167+ Verified Client Reviews in Little Rock

⭐⭐⭐⭐⭐ 4.9/5 · 167 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Little Rock · Response within 24h · No commitment · ☎ (501) 476-2705

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Little Rock ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm