Serving the Little Rock area  ·  (501) 476-2705  ·  Open Mon-Sun 7am-7pm
📞 (501) 476-2705 Free Quote

Metal Roofing in Benton, AR (72022) · Local Professionals

Little Rock Metal Roofing · Fast response in Benton and the Little Rock area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+167Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Benton, Arkansas, is a city where the lots are often wooded and the homes are a mix of established brick ranches and newer two-story builds, especially in the 72022 ZIP code. If you live near the Benton Athletic Complex or off Interstate 30, you know how quickly spring storms and summer heat can wear down a roof.

That is why homeowners in Benton call Little Rock Metal Roofing. We understand the local conditions, from the tall pines that drop limbs to the hail that comes with supercells. Our team provides metal roofing installation, repair, and replacement built for Benton's climate.

Metal Roofing in Benton (72022)

Benton sits on rocky clay and sandy loam, and many properties have mature trees that shed needles and branches. The terrain is generally flat to gently rolling, but some neighborhoods have tight driveways and steep grades that require careful staging. Drainage is important because heavy rain can pool around foundations if gutters are not sized correctly. We often recommend standing seam or stone-coated steel for Benton's newer homes south-west of Little Rock, where hail and wind are common concerns.

Our team has worked throughout Benton and the surrounding areas, including neighborhoods near the Saline County Courthouse and along Military Road. We know the local building department requirements and can help you navigate permits for a full replacement or re-roof.

Our services in Benton

How a Job Works in Benton

Step 1: Call us at (501) 476-2705 or request a free estimate online. We will schedule an on-site assessment at your Benton property, inspect your current roof, discuss your options, and provide a written estimate. We will also check for any HOA or historic district requirements if applicable.

Step 2: Once you approve the estimate, we will pull the necessary permits from the City of Benton and schedule the work. Our crew is experienced with tight lot access and will protect your landscaping. We use high-quality materials and follow manufacturer specifications for installation.

Step 3: After the job is complete, we clean up thoroughly, haul away all debris, and walk through the finished roof with you to ensure you are satisfied. We leave your property clean and tidy.

Pricing for metal roofing in Benton varies based on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. Repairs start at $450, and screw replacement at $750. For a precise estimate tailored to your Benton home, call us at (501) 476-2705.

My home in the Hurricane Creek area has a lot of pine trees. What metal roof is best for handling needle buildup and debris?
For wooded lots like those near Hurricane Creek, we often recommend standing seam metal roofing because its smooth surface allows debris to slide off more easily. Stone-coated steel is also a good option, but regular maintenance to remove needles is still important to prevent moisture buildup.
A storm just knocked a limb onto my roof in Benton. How quickly can you respond for emergency repair?
We offer free inspections for storm damage and can often schedule repairs within a few days. Call us at (501) 476-2705 to report the damage and we will prioritize your request based on urgency.
What is the typical cost to replace a roof on a 2,000 square foot home in Benton with standing seam metal?
For a 2,000 square foot home, standing seam metal roofing typically ranges from $20,000 to $30,000, depending on roof complexity, pitch, and material thickness. We provide free estimates to give you an accurate figure.
Do I need a permit from the City of Benton to install a metal roof?
Yes, roofing permits are generally required for a full replacement or re-roof in Benton. The exact requirements and fees vary, so we recommend contacting the City of Benton Building Department. We can also handle the permitting process for you.
My HOA requires approval for a metal roof. Can you help with the paperwork?
Yes, we can provide product specifications, color samples, and installation details to submit to your HOA. We are familiar with common HOA requirements in Benton and can help ensure your project meets the guidelines.
Are you fully insured for roofing work in Benton?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Benton's climate?
We recommend an inspection every two to three years, especially after major storms. Benton's hot, humid summers and occasional ice storms can affect fasteners and seals. Regular inspections help catch small issues before they become leaks.
Why choose us?

Trusted professionals in Little Rock

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Little Rock

All your work handled by qualified professionals in Little Rock

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

167+ Verified Client Reviews in Little Rock

⭐⭐⭐⭐⭐ 4.9/5 · 167 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Little Rock · Response within 24h · No commitment · ☎ (501) 476-2705

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Little Rock ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm