Serving the Little Rock area  ·  (501) 476-2705  ·  Open Mon-Sun 7am-7pm
📞 (501) 476-2705 Free Quote

Metal Roofing in Bryant, AR (72022) · Local Professionals

Little Rock Metal Roofing · Fast response in Bryant and the Little Rock area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+167Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bryant has grown fast along Interstate 30, and the rooftops have changed with it. The brick-and-siding two-story homes in subdivisions off Reynolds Road and Highway 5 were mostly built in the last twenty-five years, and their original architectural shingles are now hitting the age where hail and wind start winning. We see a lot of steep gables, tight side yards, and tall pines dropping limbs on Bryant roofs.

Little Rock Metal Roofing works Bryant and ZIP 72022 every week. From the older acreage properties near Bishop Park to the newer builds out toward Salem Road, we install, repair, and replace metal roofs built for Arkansas weather. Call (501) 476-2705 for a free on-site estimate.

Metal Roofing in Bryant (72022)

Bryant sits on rocky clay and sandy loam, and that matters when we set ladders and stage materials. Many lots in the older parts of town have mature loblolly pines close to the house, which means needle buildup in valleys and gutters, plus the occasional limb puncture after a spring storm. Newer subdivisions off Highway 5 often have narrow side yards and steep rear elevations, so we plan panel staging and fall protection around the actual lot, not a generic template. Low-pitched ranch roofs near the older center of town are good candidates for retrofit over shingles, while the two-story homes in Bryant's newer neighborhoods usually get a full tear-off and standing seam or stone-coated steel.

Our team has worked roofs across Saline County and the Little Rock area for years. We know how Bryant's clay soil holds water after a heavy rain, how ice can dam at the eaves on the shaded north slopes, and how hail hits the windward planes on these open subdivisions. We pull permits through the City of Bryant when a full replacement requires one, and we document existing layers before recommending a retrofit.

Our services in Bryant

How a Job Works in Bryant

Step 1: You call (501) 476-2705 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check flashings and fasteners, and measure the actual roof area. You get a written scope with material options and a clear price before any work starts.

Step 2: Once you approve, we handle the permit through the City of Bryant if your project needs one, coordinate with your HOA if the subdivision requires design review, and schedule delivery so panels do not sit on the street. On tight Bryant lots we stage materials in the driveway and keep the crew on one side of the house at a time. Tear-off, deck inspection, underlayment, and panel installation follow in sequence, weather permitting.

Step 3: We magnet-sweep the yard and driveway for nails, haul away old shingles and debris, and walk the finished roof with you. We show you the flashing details, the fastener lines, and the warranty paperwork, and we do not leave until you have had a chance to ask questions.

Metal roofing in Bryant prices by the square foot and by the job. For planning, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8, standing seam around $10, and metal roof replacement around $9. Retrofit over existing shingles starts around $7 per square foot, but only if your roof has a single layer and the deck is sound. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs run about $9 per linear foot.

The real number depends on roof size, pitch, access, how many layers are up there, and whether storm damage is involved. We give free estimates in Bryant and ZIP 72022, and we will tell you honestly if a repair makes more sense than a replacement. Call (501) 476-2705 to set one up.

My house is in one of the subdivisions off Reynolds Road with tall pines behind it. Do metal roofs handle pine needles and limb drops better than shingles?
They handle the limb drops better because standing seam and quality panels resist punctures that would crack an aged shingle. Pine needles are a maintenance issue on any roof. They collect in valleys and behind chimneys, hold moisture, and clog gutters. We recommend gutter guards and a seasonal blow-off, and we check valley flashing during every inspection in those wooded Bryant neighborhoods.
A storm just peeled back panels on my Bryant roof. How fast can you get out for storm damage?
We offer free storm and wind damage inspections in Bryant and try to get out within a day or two after a major event, sooner for active leaks. Call (501) 476-2705 and describe what you are seeing. We document the damage with photos you can use for an insurance claim, and we tarp or secure the roof if rain is coming.
What does a typical metal roof replacement cost for a two-story house in Bryant?
Most two-story homes in Bryant's newer subdivisions run somewhere in the range of $9 to $14 per square foot installed for a full replacement, depending on roof size, pitch, and panel type. A 2,500 square foot roof at $9 per square foot is roughly $22,500. Standing seam and copper push that higher. We measure your actual roof and give a fixed written price at the free estimate.
Do I need a permit from the City of Bryant to replace my roof, and does the HOA have a say?
Full replacements and re-roofs commonly require a permit through the City of Bryant, and thresholds and inspection requirements can change, so we confirm the current rules with the building department before we start. If your subdivision has an HOA, design review may restrict panel profile and color, and we help you submit the paperwork. We never guess on either one.
My neighbor's tree limbs hang over my roof line in Bryant. Can I trim them, and will my HOA care about the roof color?
In Arkansas you generally have the right to trim limbs that cross onto your property, but you should not cut into the health of the tree or trespass to do it, and it is worth a conversation with the neighbor first. On HOA roof color, most Bryant subdivision covenants require approval before installation. We provide color samples and specification sheets you can submit to your board.
Is your crew covered by insurance if someone gets hurt on my Bryant property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance for your records before work begins, and we recommend asking any contractor for the same before they set foot on your roof.
What maintenance should I do on a metal roof in Bryant between seasons?
Clear pine needles and leaves from valleys and gutters in late fall and again after spring storms. Have fasteners and seams checked every couple of years, especially after hail. On shaded north slopes, watch for ice damming in winter and keep attic ventilation working to reduce condensation in our humid summers. A coating refresh every several years helps in Bryant's sun and heat.
Why choose us?

Trusted professionals in Little Rock

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Little Rock

All your work handled by qualified professionals in Little Rock

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

167+ Verified Client Reviews in Little Rock

⭐⭐⭐⭐⭐ 4.9/5 · 167 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Little Rock · Response within 24h · No commitment · ☎ (501) 476-2705

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Little Rock ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm